In addition to the following ASTM roofing-related material standards, there are several ASTM test methods and standard practices that are applicable to roofing.
volumes and individual standards can be purchased from ASTM. To contact ASTM, write to 100 Barr Harbor Drive, West Conshohocken, PA 19428, call (610) 832-9500 or visit ASTM's Web site
ASTM roofing-related material standards
| ASTM C 208 | Standard Specification for Cellulosic Fiber Insulating Board |
| ASTM C 406 | Specification for Roofing Slate |
| ASTM C 552 | Specification for Cellular Glass Thermal Insulation |
| ASTM C 578 | Specification for Rigid, Cellular Polystyrene Thermal Insulation |
| ASTM C 726 | Specification for Mineral Fiber Roof Insulation Board |
| ASTM C 728 | Specification for Perlite Thermal Insulation Board |
| ASTM C 1167 | Specification for Clay Roof Tile |
| ASTM C 1225 | Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates |
| ASTM C 1289 | Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM D 41 | Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing |
| ASTM D 43 | Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing |
| ASTM D 173 | Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing |
| ASTM D 224 | Specification for Smooth-Surfaced Asphalt Roll Roofing (Organic Felt) |
| ASTM D 225 | Specification for Asphalt Shingles (Organic Felt) Surfaced with Mineral Granules |
| ASTM D 226 | Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing |
| ASTM D 227 | Specification for Coal-Tar Saturated Organic Felt Used in Roofing and Waterproofing |
| ASTM D 249 | Specification for Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules |
| ASTM D 312 | Specification for Asphalt Used in Roofing |
| ASTM D 371 | Specification for Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules; Wide Selvage |
| ASTM D 449 | Specification for Asphalt Used in Dampproofing and Waterproofing |
| ASTM D 450 | Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing |
| ASTM D 1187 | Specification for Asphalt Based Emulsions Used as Protective Coatings for Metal |
| ASTM D 1227 | Specification for Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 1668 | Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing |
| ASTM D 1863 | Specification for Mineral Aggregate Used on Built-Up Roofs |
| ASTM D 1970 | Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection |
| ASTM D 2178 | Specification for Asphalt Glass Felt Used in Roofing and Waterproofing |
| ASTM D 2626 | Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing |
| ASTM D 2822 | Specification for Asphalt Roof Cement |
| ASTM D 2823 | Specification for Asphalt Roof Coatings |
| ASTM D 2824 | Specification for Aluminum-Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, and Fibered without Asbestos |
| ASTM D 3018 | Specification for Class A Shingles Surfaced with Mineral Granules |
| ASTM D 3019 | Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos Fibered, and Non-Asbestos Fibered |
| ASTM D 3462 | Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules |
| ASTM D 3468 | Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing |
| ASTM D 3747 | Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation |
| ASTM D 3909 | Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules |
| ASTM D 4022 | Specification for Coal Tar Roof Cement, Asbestos Containing |
| ASTM D 4434 | Specification for Poly(Vinyl Chloride) Sheet Roofing |
| ASTM D 4479 | Specification for Asphalt Roof Coatings—Asbestos Free |
| ASTM D 4586 | Specification for Asphalt Roof Cement, Asbestos Free |
| ASTM D 4601 | Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing |
| ASTM D 4637 | Specification for EPDM Sheet Used In Single-Ply Roof Membrane |
| ASTM D 4811 | Specification for Nonvulcanized Rubber Sheet Used as Roof Flashing |
| ASTM D 4869 | Specification for Asphalt-Saturated Organic Felt Shingle Underlayment Used in Roofing |
| ASTM D 4897 | Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing |
| ASTM D 4990 | Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing |
| ASTM D 5019 | Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane |
| ASTM D 5643 | Specification for Coal Tar Roof Cement, Asbestos Free |
| ASTM D 6083 | Specification for Liquid Applied Acrylic Coating Used in Roofing |
| ASTM D 6134 | Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems |
| ASTM D 6152 | Specification for SEBS-Modified Asphalt Used in Roofing |
| ASTM D 6162 | Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM D 6163 | Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements |
| ASTM D 6164 | Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements |
| ASTM D 6221 | Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing |
| ASTM D 6222 | Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements |
| ASTM D 6223 | Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM D 6298 | Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface |
| ASTM D 6380 | Specification for Asphalt Roll Roofing (Organic Felt) |
| ASTM D 6509 | Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements |
