Abstract
This paper reports on the problem of EPDM membrane shrinkage. Evaluations included in NRCA's Project Pinpoint, shrinkage survey data and field research. Also, to further understand the phenomenon, which typically is not catastrophic, three sets of membrane samples were obtained and analyzed: control samples of new EPDM sheets, samples from roofs that exhibited moderate to sever shrinkage problems, and samples from roofs that had nonoticeable problems. Evaluation included measuring the glass transition temperature, changes in chemical composition, tensile strenght and elongation tests, as well as thermally induced load tests. Generally, the membrane composition and properties were found to not change sufficiently to cause excessive shrinkage. Only six samples exhibited more than 3% weight loss which was attributed to oil loss and three samples had a change in glass transition temperature greater than 5F. Most of the aged samples met ASTM D 4637-87 specifications for elongation for new materials. One sample did not meet this standard. The paper presents conclusions and recommendations for existing roofs, reroofing and new construction.
This paper reports on the problem of EPDM membrane shrinkage. Evaluations included in NRCA's Project Pinpoint, shrinkage survey data and field research. Also, to further understand the phenomenon, which typically is not catastrophic, three sets of membrane samples were obtained and analyzed: control samples of new EPDM sheets, samples from roofs that exhibited moderate to sever shrinkage problems, and samples from roofs that had nonoticeable problems. Evaluation included measuring the glass transition temperature, changes in chemical composition, tensile strenght and elongation tests, as well as thermally induced load tests. Generally, the membrane composition and properties were found to not change sufficiently to cause excessive shrinkage. Only six samples exhibited more than 3% weight loss which was attributed to oil loss and three samples had a change in glass transition temperature greater than 5F. Most of the aged samples met ASTM D 4637-87 specifications for elongation for new materials. One sample did not meet this standard. The paper presents conclusions and recommendations for existing roofs, reroofing and new construction.
Date
9/1995
9/1995
Author(s)
R Paroli; A Delgado; O Dutt; T Smith; T Simmons
R Paroli; A Delgado; O Dutt; T Smith; T Simmons
Page(s)
90-110
90-110
Keyword(s)
base securement; EPDM; shrinkage; bridging; contraction; tenting; themal analysis; induced load; glass transition temperature
base securement; EPDM; shrinkage; bridging; contraction; tenting; themal analysis; induced load; glass transition temperature