Abstract
Standing seams that are out of the flood plain and sliding clips that allow metal panels to expande and contract thermally have significantly improved the performance of metal roofing systems. By fixing the metal panels to the frame only at the eave, differential movements do not occur at that vulneralbe location where all water drains, snow and ice may slide and ice dams may form. When water ponds on metal roofs behind icicles and ice dams, the risk of leaks increases greatly. Such risks can be reduced by using "waterproof" (not water shedding) systems, by increasing the slope, by reducing the overhand at the eaves, by increasing the amount of roof or attic insulation, and by ventilating between insulation and the metal to create a "cold" roof. Since it is difficult to properly ventilate a metal roof with a slope of 2 in/ft or less, there is incentive to use greater slopes in cold regions. Most metal roofing systems are not ventilated, but in cold regions, ventilation may be needed to reduce the risk of condensation problems and ice damming. Small, infrequent ice dams along the eaves of "cold" metal roofs seldom create problems. When large dams develop at the eaves, it maybe necessary to install electric heaters. The tendency for snow and ice to slide off slippery metal roofs complicates the installation of electric de-icing systems and may create hazards. Snow guards are needed on some metal roof to prevent snow & ice from sliding. Standing seam metal roofs are well suited to some applications in cold regions but not to others. When these roofs are used inappropriately, chronic problems that are ver difficult and expensive to resolve are likely. When used appropriately, these roofs perform well. In this paper, a "cold region" is a place where snow is present for some time, not just for a short period after an infrequent snow storm. By this definition, Atlanta, Ga. would not be a cold region but Boston, Mass. would.
Standing seams that are out of the flood plain and sliding clips that allow metal panels to expande and contract thermally have significantly improved the performance of metal roofing systems. By fixing the metal panels to the frame only at the eave, differential movements do not occur at that vulneralbe location where all water drains, snow and ice may slide and ice dams may form. When water ponds on metal roofs behind icicles and ice dams, the risk of leaks increases greatly. Such risks can be reduced by using "waterproof" (not water shedding) systems, by increasing the slope, by reducing the overhand at the eaves, by increasing the amount of roof or attic insulation, and by ventilating between insulation and the metal to create a "cold" roof. Since it is difficult to properly ventilate a metal roof with a slope of 2 in/ft or less, there is incentive to use greater slopes in cold regions. Most metal roofing systems are not ventilated, but in cold regions, ventilation may be needed to reduce the risk of condensation problems and ice damming. Small, infrequent ice dams along the eaves of "cold" metal roofs seldom create problems. When large dams develop at the eaves, it maybe necessary to install electric heaters. The tendency for snow and ice to slide off slippery metal roofs complicates the installation of electric de-icing systems and may create hazards. Snow guards are needed on some metal roof to prevent snow & ice from sliding. Standing seam metal roofs are well suited to some applications in cold regions but not to others. When these roofs are used inappropriately, chronic problems that are ver difficult and expensive to resolve are likely. When used appropriately, these roofs perform well. In this paper, a "cold region" is a place where snow is present for some time, not just for a short period after an infrequent snow storm. By this definition, Atlanta, Ga. would not be a cold region but Boston, Mass. would.
Date
4/1993
4/1993
Author(s)
Wayne Tobiasson; James Buska
Wayne Tobiasson; James Buska
Page(s)
34-44
34-44
Keyword(s)
condensation; drainage; electric heater; heating cable; ice dam; metal roof; snow; snow guard; thermal expansion; vapor retarder
condensation; drainage; electric heater; heating cable; ice dam; metal roof; snow; snow guard; thermal expansion; vapor retarder